詳細內容：產品基本信息： 型號：cut CO 6-102 英文名稱:Klubercut CO 6-102 粘度等級：ISO VG不適用 品牌/產地：克魯勃，德國 包裝規格及價格：20L/3588 類型：合成金屬加工油 寶貝描述： Klubercut CO 6-102合成金屬加工油 說明：Klübercut CO6-102是一種人工合成的，礦物烴無金屬加工油。它可分為作為環境相容金屬切割和打孔流程。這種高品質的金屬加工油不相溶的未經稀釋的水和應用。這是擺脫問題的物質如- 胺，- 硼，-氯，- 磷，- 硫，- 重金屬，- 硅膠，因而顯示了幾乎中性對金屬的行為。Klübercut CO6-103被列為不會危害水。在同當時，它正迅速生物降解。根據CEC L- 33- T- 82測試中，只有這樣的產品正在迅速可生物降解，其降解經過21天的費率為70％以上。除了在分鐘殘留切屑，產品經歷迅速生物降解的廢料階段并轉化為一種物質不危害環境。 應用：而應用的重點是在一系列容易中等切割過程，例如的- 鉆，鏜，- 銑，- 鋸切。此外，它也可以用于- 折疊，- 彎曲，- 步沖，- 剪切，- 沖壓。Klübercut CO6-103是一個合適的數金屬，特別是對- 鋁及鋁合金，- 有色金屬，因此，但對于- 鋼，- 復合材料。由于Klübercut CO6-103使用未稀釋的，只有極少量是需要在摩擦點，即工具之間的接觸點和工件。微劑量構成了技術進步環境方向兼容性。其優點包括：•僅分鐘殘油依然在切屑時，切屑可直接轉移到報廢循環和重復使用•沒有處置冷卻劑，無用于分離和處置乳液•明顯改善工作環境;幾乎干燥機和組件，少用或油霧油蒸氣•提高刀具壽命和表面質量;未稀釋的金屬加工油減少摩擦和產生的熱量。 包裝規格：20升桶 英文： Klübercut CO 6-102 Metalworking oil Description: Klübercut CO 6-102 is a metalworking oil. It is environmentally compatible and can be used for metal cutting and punching processes. This high-quality metalworking oil is not miscible with water and is applied undiluted. It is free from problematic constituents such as – amines, – boron, – chlorine, – phosphor, – sulphur, – heavy metals, – silicone, and thus shows an almost neutral behaviour towards metals. Klübercut CO 6-102 is classified as non-water polluting. At the same time, it is rapidly biodegradable. According to the CEC-L-33-T-82 test, only such products are rapidly biodegradable whose degradation rate after 21 days is more than 70%. Apart from minute residue on the swarf, the product undergoes rapid biodegradation in the scrap phase and is transformed into a substance non hazardous to the environment. Application: The emphasis of application is in the range of easy to medium cutting processes, e.g. in – drilling and boring, – milling, – sawing. Klübercut CO 6-102 is suitable for a number of metals, particularly for – Al and Al alloys, – nonferrous metals, but also for – steels, – composite materials. As Klübercut CO 6-102 is used undiluted, only a very small quantity is required on the friction point, i.e. the point of contact between the tool and the workpiece. Micro-dosing constitutes a technical progress in the direction of environmental compatibility. The advantages include: – only minute oil residue remains on the swarf; the swarf can be directly transferred to the scrap cycle and be re-used; – no disposal of coolants, no separation and disposal of used emulsions; – clearly improved working environment; almost dry machines and components, less oil mist or oil vapour; – improved tool life and surface quality; the undiluted metalworking oil reduces friction and heat generation. Application notes: The successful application of Klübercut CO 6-102 is based on using only minimal quantites by way of micro-dosage. This metalworking fluid proves its efficiency in lubrication with extremely small quantities and not in cooling with large quantities. Klübercut CO 6-102 is applied to the area between the tool’s cutting edge and the workpiece. The product’s excellent lubricity permits reduction of the cutting speed and increase of the feed rate. We will be pleased to assist you in selecting a suitable microdosing system. Minimum shelf life: The minimum shelf life is approx. 12 months if the product is stored in the original closed container in a dry place. Pack sizes: 20 l canister Klübercut CO 6-102 • Rapidly biodegradable • Non-water polluting • Environmentally compatible, no disposal • Almost dry machines • Almost dry tools and swarfs • Low consumption Product data: Colour, aspect yellow Density, DIN 51 757 (ASTM-D 1298), at 20 °C, g/ml, approx. 0.92 Kinematic viscosity, DIN 51 561, at 40 °C, mm2/s, approx. 30 Flash point, DIN ISO 2591, open cup, °C, approx. 300 Pour point, °C, DIN ISO 3016, approx. – 15